Pet Flap Door

4 WAY LOCKING : The pet door with lock have 4 switch modes, the pet doors for dog could be adjusted by the red and green switches with tabs, can be set to open, in only, out only or fully locked, easily adjustable making it easy to keep your pets in or out 

Function Instruction of the Switches: Turn Red and Green switches to both sides, pet is prevented from entering or exiting house. Turn Red and Green switches to right side, pet is allowed to enter house, but prevent from exiting house. Turn Red and Green switches to left side, pet is allowed to exit house but prevent from entering house. Turn Red and Green switches to middle, pet can leave and exit any time.

High quality unique adjustable 2-inch door lining; easy to install and suitable for all doors, panels and walls, 

Features:

•  Easy to install, simple and generous.
• The quality is very good, using ABS material (a very good kind of plastic)
• Large, relatively large size, suitable for pet 
• Four major functions: (1) No entry and no exit (completely closed) (2) Can go in and out (completely open) (3) Only in but not out (4) Only going out but not in

Specifications:

S: Frame size: height 19.7*width 19*thickness 2CM Door cover size: inner height 15CM* inner door width 15CM

M: Frame size: height 19.7*width 19*thickness 5.5CM Door cover size: inner height 15CM* inner door width 15CM

L: Frame size: height 25*width 23.5*thickness 5.5CM Door cover size: inner height 19CM* inner door width 18.2CM

XL: Frame size: height 27.7*width 25.5*thickness 5.5CM Door cover size: inner height 22CM* inner door width 19CM

Installation method Step :

Tools needed: electric drill, iron saw or electric saw, measuring ruler,

• First use a piece of paper to draw the size of the door cover (there may be a few millimeters error);
• Finish the drawing and mark it on the door, and draw the seal with a pencil,
• Use a drill to drill a hole in the four corners of the painted door, and then start to dig the hole directly if there is a chainsaw,
• If it is a glass door, use a glass scribing tool to gently cut it open and fix it with glass glue,
• The hole is cleaned up, now first get a layer of wooden leather to wrap around the hole, for the sake of beauty;
• Install the pet door, there are accessory screws, and screw them on with a screwdriver,
• The screw port is also equipped with a screw cover, press it, OK.